They have the correct tools and more importantly the skill to do the job. with lovely pastel green and blue Joy-Con controllers that are white on the back, white wrist straps and a white Nintendo Switch Dock, adorned with. If this seems a bit to daunting (the soldering I mean) take the motherboard to a reputable, professional mobile phone, electronics or laptop repair service and ask for a quote to resolder the connector. If the connector is loose then you'll need SMD (surface mounted device) soldering skills and tools to effect the repair. The USB charge port is clearly visible in the images in the guide from Step.7 on.
PS3 CONTROLLER CONNECTOR HOW TO
It is helpful as it shows how to dis-assemble the controller to get access to the motherboard. Here is a link to the ifixit DualShock 3 Motherboard Replacement guide. If it seems OK then perhaps the connector is loose on the motherboard. This address can be retrieved by following the procedure illustrated here. As input, we need to pass the Bluetooth address stored on the PS3 controller.
If you have to dislodge any stubborn material, use a wooden toothpick to gently prise it out. Serial.begin (115200) Next we will initialize the Bluetooth layer of the ESP32 and make it ready to receive a controller connection simply by calling the begin method on the Ps3 extern variable.
DO NOT use a metal probe as you may damage the pins. If there is any debris in the enclosure, use a vacuum cleaner to try and suck it out. Alternatively, you can pair a PS4 controller with a PS3 for a wireless connection, though the process of connecting the two devices is more complicated. PlayStation 4 controllers work with a PlayStation 3 console. Also check that the pins are all there and that they straight and parallel with each other. Using a wired connection, you do not need to install any additional hardware. First use a strong light and a magnifying glass to check if the charge port enclosure is clear of any obstruction such as lint or dust. Answer (1 of 2): The type of USB connector needed to charge a PS3 controller is the USB 2.0 Mini-B 5-pin on one end and a USB 2.0 Type A on the other (the Mini-B side for the controller and the Type A for the console).